Test tube racks are laboratory equipment used to hold upright multiple test tubes at the same time. They are most commonly used when various different solutions are needed to work with simultaneously, for safety reasons, for safe storage of test tubes, and to ease the transport of multiple tubes. Test tube racks also ease the organization of test tubes and provide support for the test tubes being worked with.[1]
open at the top and closed at the bottom. Testtubes are usually placed in special-purpose racks. Testtubes intended for general chemical work are usually...
cannot be held using your hand. A metal testtube holder TesttubeTesttuberack "Wiltronics - TestTubeRacks Holders & Cleaning Brushes". www.wiltronics...
A testtube brush or spout brush is a brush used for cleaning testtubes and narrow mouth laboratory glassware, such as graduated cylinders, burettes,...
graduated glass tube with a tap at one end, for delivering known volumes of a liquid, especially in titrations. It is a long, graduated glass tube, with a stopcock...
slots in the side of the tube bottom to admit air into the stream using the Venturi effect, and the gas burns at the top of the tube once ignited by a flame...
titration. Graduated pipettes are a type of macropipette consisting of a long tube with a series of graduations, as on a graduated cylinder or burette, to indicate...
ordinary testtubes were used. As innovation motivated changes in technique, cuvettes were constructed to have focal points over ordinary testtubes.[clarification...
clinical applications like blood collection tubes Multipurpose high-speed centrifuges devices for a broad range of tube sizes, high variability, big footprint...
are spectral bandwidth (the range of colors it can transmit through the test sample), the percentage of sample transmission, the logarithmic range of...
called flip-tops or snap caps. The bottom of a vial is often flat, unlike testtubes, which have usually a rounded bottom, but this is often not the case for...
A funnel is a tube or pipe that is wide at the top and narrow at the bottom, used for guiding liquid or powder into a small opening. Funnels are usually...
the conditions of experiments. Jöns Jacob Berzelius, who invented the testtube, and Michael Faraday both contributed to the rise of chemical glassblowing...
This process is also used to pour a large-mouthed flask or beaker into a testtube. Glass rods can also be used to induce crystallization in a recrystallization...
in electrical potential relates to the acidity or pH of the solution. Testing of pH via pH meters (pH-metry) is used in many applications ranging from...
laboratories, including: Biochemistry Microbiology Pharmacology Testtubes in racks Beaker Burette A cuvette of a colorimeter Petri dish A set of micropipettes...
flasks, testtubes. General specifications. ASTM C188 - 09 Standard Test Method for Density of Hydraulic Cement. Hughes, J. C. (Apr 1959), Testing of Glass...
2017 study performed by the Johns Hopkins Hospital biocontainment unit tested the ability of pass-through autoclaves to decontaminate loads of simulated...
introduced. These were sandy clay crucibles which had been formed around a fabric tube. These crucibles were used in the same way as other cementation vessels but...
drying rack is usually used to dry up the tube in the laboratory; for example, it can help in drying testtube, boiling tube, and Thiele tube. In addition...
substance. The apparatus resembles a glass testtube with an attached handle. Oil is poured into the tube, and then the "handle" is heated, either by...
a tube that leads the air out of the calorimeter. When the air is escaping through the copper tube it will also heat up the water outside the tube. The...
connected to a tube, partially filled with water. As the air in the bulb warms or cools, the height of the column of water in the tube falls or rises...
Global Information