Superfinishing, also known as microfinishing[1] and short-stroke honing, is a metalworking process that improves surface finish and workpiece geometry. This is achieved by removing just the thin amorphous surface layer of fragmented or smeared metal left by the last process with an abrasive stone or tape; this layer is usually about 1 μm in magnitude.
key feature of superfinishing because it prevents the sort of smeared finish that results from built up edge. In this way, superfinishing is similar to...
Hornaday Jr. 19-Lance Norick -1 20-Walker Evans -1 The inaugural DeVilibiss Superfinish 200 was held June 30 at Nazareth Speedway. Jimmy Hensley won the pole...
Nazareth Speedway is a defunct auto racing facility in Lower Nazareth Township in the Lehigh Valley region of eastern Pennsylvania, which operated from...
career 1 race run over 1 year Best finish 92nd (1996) First race 1996 DeVilbiss Superfinish 200 (Nazareth) Statistics current as of December 21, 2012....
consumable Stropping, which often includes lapping action in its action Superfinishing – another micro-scale subtractive finishing operation Surface metrology...
technique for fabrication of 3D and 2D structures on the micrometer scale. Superfinishing, a metalworking process for producing very fine surface finishes Various...
sharpening Japanese swords is called polishing and may be a form of superfinishing. Different chemical or structural modifications may be made to alter...
blades, nozzles, and seals), surgical knives, blades, scissors, honing, superfinishing, cylinder liners, connecting rods, grinding of steel and paper mill...
pioneered rubber engine mounts to reduce vibration; Oilite bearings; and superfinishing for shafts. Chrysler also developed a road wheel with a ridged rim,...
resistance tires, driver feedback systems, solar panels, low-drag brakes, superfinishing of driveline components, and other technologies. FED "Bravo" detailed...
Phoenix International Raceway 3 June 30, 1996 24 Jack Sprague DeVilbiss Superfinish 200 Nazareth Speedway 4 July 6, 1996 24 Jack Sprague Sears Auto Center...
appearance of this new process is somewhat reminiscent of the development of superfinishing in the 1930s in the respect that a new metalworking process for surface...