The Socket FP3 or μBGA906 is a CPU socket for laptops that was released in June 2014 by AMD with its mobility APU products codenamed Kaveri.
"Kaveri"-branded ULV products combine Steamroller with Crystal Series (GCN), UVD 4.2 and VCE 2 video acceleration, AMD TrueAudio audio acceleration and AMD Eyefinity-based multi-monitor support of up to two non-DisplayPort- or up to four DisplayPort monitors.
ECC DIMMs are supported on Socket FP3, mixing of ECC and non-ECC DIMMs within a system is not supported.[1]
There are 3 PCI Express cores: one 2 x16 core and two 5 x8 cores, for a total of 64 lanes. There are 8 configurable ports, which can be divided into 2 groups:
Gfx-group: contains 2 x8 ports. Each port can be limited to lower link widths for applications that require fewer lanes. Additionally, the two ports can be combined to create a single x16 link.
GPP-group: contains 1 x4 UMI and 5 General Purpose Ports (GPP).
All PCIe links are capable of supporting PCIe 2.x data rates. In addition, the Gfx link is capable of supporting PCIe 3.x data rate. The FP3 package supports two different voltage levels on the VDDP rail. At the 1.05 V nominal setting, the Gfx link can support PCI Express 3.x data rate, while at the 0.95 V setting, the maximum data rate supported by the Gfx link is PCI Express 2.x[1]
The FP3 package supports two different voltage levels on the VDDR rail. At the 1.05 V nominal setting, the maximum speed of DDR3-2133 can be supported while at the 0.95 V setting, the maximum speed supported is DDR3-1600.[1]
The SocketFP3 or μBGA906 is a CPU socket for laptops that was released in June 2014 by AMD with its mobility APU products codenamed Kaveri. "Kaveri"-branded...
(FCH). Steamroller-based "Kaveri" APUs are not supported, see Socket FM2+ (FM2r2) and SocketFP3 (BGA-???). The four holes for fastening the heatsink to the...
for example Steamroller-based mobile processors uses SocketFP3socket, which is a μBGA socket. Intel also adopted same practice, starting with Broadwell...
(ROPs). 1 CU (Compute Unit) = 64 USPs: 4 TMUs : 1 ROPs Fabrication 28 nm SocketFP3 Up to 4 Steamroller x86 CPU cores with 4 MB of L2 cache. L1 Cache: 16...
Fastest desktop processor of this series: AMD A10-7850K (95 W) Socket FM2+ and SocketFP3 Target segment desktop and mobile Heterogeneous System Architecture-enabled...
Socket FM1 is a CPU socket for desktop computers used by AMD early A-series APUs ("Llano") processors and Llano-derived Athlon II processors. It was released...
modules are compatible with the FP3. However, the improved audio primarily comes from the new core module in the FP3+ and is not upgradable as this is...
The Socket FP2 or μBGA-827 is a CPU socket for notebooks that was released in May 2012 by AMD with its APU processors codenamed Trinity and Richland. "Trinity"-branded...
The Socket FT1 or BGA413 is a CPU socket released in January 2011 from AMD for its APUs codenamed Desna, Ontario, Zacate and Hondo. The uber name is "Brazos"...
AMD's Socket FT3 or BGA-769 targets mobile devices and was designed for APUs codenamed Kabini and Temash, Beema and Mullins (Socket FT3b). "Kabini"- and...
architecture known as FP3, advertised for 400 Gbit/s rates. Alcatel-Lucent announced the XRS 7950 core router (based on the FP3) in May 2012. Brocade...
dynamic clock adjustments when the notebook is not plugged into a power socket and allowing different backlight brightness levels of the notebook LCD monitor...