Productiontubing is a tube used in a wellbore through which production fluids are produced (travel). Productiontubing is run into the drilled well after...
interventions in oil and gas wells and sometimes as productiontubing in depleted gas wells. Coiled tubing is often used to carry out operations similar to...
tubing and the inside of the casing, liner, or wellbore wall. Based on their primary use, packers can be divided into two main categories: production...
(pressure in the productiontubing as measured at the tubing hanger[citation needed]) THRT – tubing hanger running tool THS – tubing head spool TIE –...
A tubing hanger is a component used in the completion of oil and gas production wells. It is set in the tree or the wellhead and suspends the production...
Dialysis tubing, also known as Visking tubing, is an artificial semi-permeable membrane tubing used in separation techniques, that facilitates the flow...
point of communication between it and the productiontubing just above the production packer and up the tubing, displacing the lighter well bore fluids...
valve may be used instead. This type of valve can fit inside the productiontubing and is deployed on wireline after the old valve has been straddled...
Tygon® is a brand name for a family of flexible polymer tubing consisting of a variety of materials to be used "across a range of specialized fluid transfer...
shaft that, in turn, rotates pump impellers to lift fluid through productiontubing to the surface. These components must reliably work at high temperatures...
the casing across the production zone, to provide a path for the oil to flow from the surrounding rock into the productiontubing. In open hole completion...
material with the pumped fluid. The tubing manufacturers may also have compatibility charts specific to their tubingproduction method, coating, material, and...
The production string is a part of an oil well that is composed of the productiontubing and other completion components and serves as the conduit through...
tubing to repair or replace the valve. A gas-lift valve is a device installed on (or in) a gas-lift mandrel, which in turn is put on the production tubing...
refers to the integrity of the productiontubing. Common threats to tubing integrity are erosion and corrosion by production fluids, which denude the steel...
7 in (180 mm) productiontubing might be installed in a larger diameter casing. Gas wells may only require a small 2+7⁄8 in (73 mm) tubing set in 4+3⁄4 in...
one another) or the tubing, a smaller diameter pipe hung inside the casing. Slickline is more commonly used in productiontubing. The wireline operator...
casing/tubing strings. Provides a means of attaching a blowout preventer during drilling. Provides a means of attaching a Christmas tree for production operations...
crew will normally comprise: Well services supervisor Wireline or coiled tubing operators Pump operator Pump hanger and ranger The nature of their operation—extraction...
cost savings, the liner installation allows larger drill pipe or productiontubing to be used in the upper portions of the well. (A disadvantage is the...
steel frame construction is a method of building bicycle frames using steel tubing mated with socket-like sleeves, called lugs. For most of the bicycle's history...
by drawing the tube through a die. This process produces high-quality tubing with precise dimensions, good surface finish, and the added strength of...
A Tubing spider is a tool used primarily in the oil industry for gripping the drill string while assembling or reassembling parts of the string. The spider...
automotive, textiles, electronics and sports equipment, frequently in tubing, wire sheathing, and metal coatings. In 1938, a research director for Thann...