A SATA 2.0 (3 Gbit/s) PCI Express ×1 expansion card, having two built-in SATA port multipliers (square chips to the left and right of the middle of PCB) that "splice" card chipset's two SATA ports into a total of eight ports.
A Serial ATA port multiplier (SATA PM) is a device that allows multiple SATA devices to be connected to a single SATA host port. Many common controllers do not support this feature,[1] as it is not a requirement for a SATA controller.[2]
^List of SATA controller hardware features, a comparison in Linux ATA wiki
^Serial ATA II: Port Multiplier specification Archived 2011-06-17 at the Wayback Machine by Serial ATA II Workgroup
single SATA host port using a portmultiplier. The total bandwidth is still limited to that of a single SATA port. When using a portmultiplier in a scenario...
1 to 5-port SATA 6 Gb/s PortMultiplier or 5 to 1-port SATA 6 Gb/s Port Selector JMB572: 1 to 2-port SATA 6 Gb/s PortMultiplier or 2 to 1-port SATA 6 Gb/s...
functionality such as a portmultiplier is required, a PCI Express add-on card can be used. If it has portmultiplier support, an eSATAp port allows a user to...
use of portmultipliers to achieve port expansion, and some portmultiplier manufacturers have implemented multipath I/O using portmultiplier hardware...
devices. SATA defines multipliers, which allows a single SATA controller port to drive up to fifteen storage devices. The multiplier performs the function...
AHCI implementation on OpenBSD's and added extended features such as portmultiplier support. Older versions of operating systems require hardware-specific...
Self-Monitoring, Analysis, and Reporting Technology, PATA/SATA, ATAPI, portmultiplier, hot swapping and Native Command Queuing. Ward, Brian (2015). How Linux...
original on 2020-09-03. Retrieved 2016-06-25. "4 Optical Drives through PortMultiplier". vampiric.us. Archived from the original on 28 December 2014. Retrieved...
SATA 3 Gbit/s eSATA/PortMultiplier (Hot-plug and PortMultiplier is a BIOS option which few motherboards actually support) SATA Port Disable Allows disabling/enabling...
initiators use the LIP (Loop Initialization Protocol) to interrogate each device port for its WWN (World Wide Name). For iSCSI, because of the unlimited scope...
DisplayPort (DP) is a proprietary digital display interface developed by a consortium of PC and chip manufacturers and standardized by the Video Electronics...
expected to multiply the total capacity of Jebel Ali port by more than seven, making it the world's biggest container port, surpassing the ports of Shanghai...
device has "downstream" facing ports that connect to the "upstream" facing ports of devices. Only downstream facing ports provide power; this topology was...
total volume in cubic metres (m3), and K, a multiplier based on the ship volume. The value of the multiplier K increases logarithmically with the ship's...
[citation needed] Source port (16 bits) Identifies the sending port. Destination port (16 bits) Identifies the receiving port. Sequence number (32 bits)...
Port Macquarie, locally nicknamed Port, is a coastal city in the local government area of Port Macquarie-Hastings. It is located on the Mid North Coast...
Accelerated Graphics Port (AGP) is a parallel expansion card standard, designed for attaching a video card to a computer system to assist in the acceleration...
Side attack or Back fire attack, the current score multiplier increases by 1, up to 12. The multiplier decreases by 1 at a time when enemy is not destroyed...
A phase detector or phase comparator is a frequency mixer, analog multiplier or logic circuit that generates a signal which represents the difference in...
Hardware multiplier Some MSP430 models include a memory-mapped hardware multiplier peripheral which performs various 16×16+32→33-bit multiply-accumulate...
significant change in the underlying architecture was the addition of a Booth multiplier, whereas formerly multiplication had to be carried out in software. Further...
before failure is detected, is Diagnostic Interval (1000ms) multiplier with Disjoin Multiplier (3), for a 3000ms recovery time. Similar to Switch Fault Tolerance...
Global Information