Optical flats in case. About 2.5 centimetres (1 in) in diameter. The third flat from the left is standing on edge, showing the thickness.A λ/20 optical flat that has been coated with aluminum, making a first-surface mirrorTwo optical flats tested using 589 nm laser-light. At 2 inches (5.1 cm) in diameter and 0.5 inches (13 mm) thick, both surfaces are flat to within 1/10 of the wavelength of the light (58.9 nm), as indicated by the perfectly straight fringes.
An optical flat is an optical-grade piece of glass lapped and polished to be extremely flat on one or both sides, usually within a few tens of nanometres (billionths of a metre). They are used with a monochromatic light to determine the flatness (surface accuracy) of other surfaces (whether optical, metallic, ceramic, or otherwise), by means of wave interference.[1]
When an optical flat is placed on another surface and illuminated, the light waves reflect off both the bottom surface of the flat and the surface it is resting on. This causes a phenomenon similar to thin-film interference. The reflected waves interfere, creating a pattern of interference fringes visible as light and dark bands. The spacing between the fringes is smaller where the gap is changing more rapidly, indicating a departure from flatness in one of the two surfaces. This is comparable to the contour lines one would find on a map. A flat surface is indicated by a pattern of straight, parallel fringes with equal spacing, while other patterns indicate uneven surfaces. Two adjacent fringes indicate a difference in elevation of one-half wavelength of the light used, so by counting the fringes, differences in elevation of the surface can be measured to better than one micrometre.
Usually only one of the two surfaces of an optical flat is made flat to the specified tolerance, and this surface is indicated by an arrow on the edge of the glass.
Optical flats are sometimes given an optical coating and used as precision mirrors or optical windows for special purposes, such as in a Fabry–Pérot interferometer or laser cavity. Optical flats have uses in spectrophotometry as well.
^English, R. E. (1953). "Optical Flats". In Ingalls, Albert G. (ed.). Amateur Telescope Making, Book Three. Scientific American. pp. 156–162.
An opticalflat is an optical-grade piece of glass lapped and polished to be extremely flat on one or both sides, usually within a few tens of nanometres...
test an opticalflat. A precisely figured reference flat is placed on top of the flat being tested, separated by narrow spacers. The reference flat is slightly...
Eagris, and Tagiades (water flats, snow flats), of tribe Tagiadini Flats (USPS), an oversized letter Opticalflat, an extremely flat piece of glass All pages...
An optical cavity, resonating cavity or optical resonator is an arrangement of mirrors or other optical elements that forms a cavity resonator for light...
025 μm) flatness) quartz opticalflat while applying moderate pressure. Then, the bottom of the gauge block is observed (through the opticalflat) for oil...
632.8 nm helium neon laser light source. Surfaces this flat can be molecularly bonded (optically contacted) by bringing them together under the right conditions...
An optical disc is a flat, usually disc-shaped object that stores information in the form of physical variations on its surface that can be read with the...
interferometers. In addition to classical wave model for understanding optical interference, quantum matter waves also demonstrate interference. The above...
quite flat, to allow precision optical mounts to make good contact with the table without rocking and facilitate easy assembly of the optical system...
test an opticalflat. A precisely figured reference flat is placed on top of the flat being tested, separated by narrow spacers. The reference flat is slightly...
quartz makes it a useful material for precision mirror substrates or opticalflats. Fused quartz is produced by fusing (melting) high-purity silica sand...
An optical fiber, or optical fibre, is a flexible glass or plastic fiber that can transmit light from one end to the other. Such fibers find wide usage...
appears flat—is known in bicycle racing as a "false flat". List of gravity hills The Crooked House – a building with an internal gravity hill optical illusion...
scales can be used for measuring a variety of things, from the flatness of an opticalflat to neuroscientific tests. "absolute scale". Oxford Reference...
An optical amplifier is a device that amplifies an optical signal directly, without the need to first convert it to an electrical signal. An optical amplifier...
A laser is a device that emits light through a process of optical amplification based on the stimulated emission of electromagnetic radiation. The word...
automobiles have a high optical cross section to maximize the laser return to the speed detector gun. Optical cross section of a flat mirror with a given...
photons that were scattered by the sample were collected through an opticalflat at the end of the tube. To maximize the sensitivity, the sample was highly...
A lens is a transmissive optical device that focuses or disperses a light beam by means of refraction. A simple lens consists of a single piece of transparent...
Optical tweezers (originally called single-beam gradient force trap) are scientific instruments that use a highly focused laser beam to hold and move...
typically found in optical components, such as prisms. In addition to both surfaces' being practically conformal (in practice often completely flat), the surfaces...
for Joseph Petzval, describes the optical aberration in which a flat object normal to the optical axis (or a non-flat object past the hyperfocal distance)...
the location of the secondary. Secondary mirrors in the form of an opticallyflat diagonal mirror are used to re-direct the light path in designs such...
Toposcan / Ireland 2013 at the Tokyo Metropolitan Museum of Photography and opticalflat / fiber optic type (2000) at the National Museum of Art in Osaka. In...
assume a spherical form. Dew, G.D. (March 1966), "The measurement of opticalflatness", Journal of Scientific Instruments, 43 (7): 409–415, Bibcode:1966JScI...