Motorcyclewheels are made to cope with radial and axial forces. They also provide a way of mounting other critical components such as the brakes, final drive and suspension. Wheels, and anything directly connected to them, are considered to be unsprung mass. Traditionally motorcycles used wire-spoked wheels with inner tubes and pneumatic tyres. Although cast wheels were first used on a motorcycle in 1927, it would not be until the 1970s that mainstream manufacturers would start to introduce cast wheels on their roadgoing motorcycles. Spoked wheels are usually made using steel spokes with steel or aluminium rims. Cast wheels are predominantly made from an aluminium-alloy, but can also be made from more-exotic materials, such as magnesium content alloy or carbon fibre.
used wooden, rims with wire spokes. This style of wheel evolved into a stouter motorcycle-specific wheel, still with spokes, up to the 1960s and beyond.: 134 ...
A motorcycle (motorbike, bike, or, if three-wheeled, a trike) is a two or three-wheeled motor vehicle steered by a handlebar from a saddle-style seat...
Bicycle and motorcycle dynamics is the science of the motion of bicycles and motorcycles and their components, due to the forces acting on them. Dynamics...
the misspelling was unintentional, but stuck. Their insignia is a motorcyclewheel with two tridents crossing over it. In the United States, the club...
and Australia. The club's center patch consists of an ankh over a motorcyclewheel on a set of handlebars. Its colors are blue and white, as is its metonym...
sidecar is a one-wheeled device attached to the side of a motorcycle, scooter, or bicycle, making the whole a three-wheeled vehicle. A motorcycle with a sidecar...
Comstar wheel, sometimes referred to as Com-stars or stylised as ComStar, was a composite motorcyclewheel that Honda fitted to many of its motorcycles from...
A motorcycle tyre (spelt tire in American English) is the outer part of motorcyclewheel, attached to the rim, providing traction, resisting wear, absorbing...
Williams of Long Beach, California, invented a two-wheeled electric motorcycle that towed a single-wheeled trailer. Due to the popularity of the vehicle,...
A motorcycle fork connects a motorcycle's front wheel and axle to its frame, typically via a yoke, also known as a triple clamp, which consists of an...
R_{w}} is wheel radius, A h {\displaystyle A_{h}} is the bicycle head angle measured from the horizontal, A r {\displaystyle A_{r}} is the motorcycle rake...
types and other motorcycles. For example, scooters, mopeds, underbones, minibikes, pocket bikes, electric bikes, and three-wheeledmotorcycles are often excluded...
more streamlined and modified version of the German Megola front-wheel drive motorcycle. The work took three years to complete but the result was impressive...
pedal crank mechanism to drive the rear wheel. Despite some early landmarks in its development, the motorcycle lacks a rigid pedigree that can be traced...
spring energy. They allow the front wheel to react to imperfections in the road while isolating the rest of the motorcycle from that motion. The top of the...
of motorcycles and motorcycling: Motorcycle — two-wheeled, single-track motor vehicle. Other names include: motorbike, bike, and cycle. Motorcycling —...
engine as with a motorcycle, with a chassis securing the steering, driver's seat, and propulsion mechanism to the interior of the wheel. Hand-cranked and...
motortrycle is a three-wheeled vehicle based on the same technology as a bicycle or motorcycle, and powered by an electric motor, motorcycle, scooter or car...
slowly as the wheel out-tracks. This can be especially helpful in motorcycle racing. Deliberately countersteering is essential for safe motorcycle riding, and...
Global Information