Lanxide process information

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Lanxide process" – news · newspapers · books · scholar · JSTOR (January 2011) (Learn how and when to remove this message) The topic of this article may not meet Wikipedia's general notability guideline. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted. Find sources: "Lanxide process" – news · newspapers · books · scholar · JSTOR (January 2011) (Learn how and when to remove this message) (Learn how and when to remove this message)

The Lanxide process, also known as pressureless metal infiltration, is a way of producing metal-matrix composite materials by a process of partial reaction; the process involves a careful choice of initial alloy (usually aluminium with about 3% magnesium and about 10% silicon), and then the maintenance of conditions in which the polycrystalline reaction product has a mechanical composition such that metal is drawn up through it towards the oxidiser by capillary action, so the composite material grows downwards.

The process can be used for near-net-shape casting, including in protocols where the final casting has a cavity in the shape of the casting pattern - in that case, the metal is poured into the cavity, which has been arranged to lie in the middle of a quantity of "filler" corresponding to the reaction product, and wicks itself to fill the pores in the filler.^{[clarification needed]}

The normal application is to produce alumina-reinforced aluminium; the process also allows the growth of ceramic layers inside metal encasements, providing pre-stressing.

Lanxide metal-matrix composite materials were used for brake disks in the original models of the Lotus Elise sports car but they turned out to be uneconomic.^[1]