This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)
This article may be too technical for most readers to understand. Please help improve it to make it understandable to non-experts, without removing the technical details.(February 2024) (Learn how and when to remove this message)
This article provides insufficient context for those unfamiliar with the subject. Please help improve the article by providing more context for the reader.(February 2024) (Learn how and when to remove this message)
(Learn how and when to remove this message)
A keepalive (KA) is a message sent by one device to another to check that the link between the two is operating, or to prevent the link from being broken.
A keepalive (KA) is a message sent by one device to another to check that the link between the two is operating, or to prevent the link from being broken...
declared otherwise. The HTTP persistent connections do not use separate keepalive messages, they just allow multiple requests to use a single connection...
waits for one in return in order to transition to the OpenConfirm state. Keepalive messages are exchanged and, upon successful receipt, the router is placed...
failing links than would normally be possible using the protocol's own keepalive mechanism. A session may operate in one of two modes: asynchronous mode...
disconnects or half-open TCP connections. Applications can be written to send keepalive messages periodically to prevent a firewall from dropping the connection...
generated traffic by eliminating workarounds in form of outgoing NAT keepalive messages, which are required for maintaining connections to servers and...
typically by writing a zero character to /dev/watchdog or by calling a KEEPALIVE ioctl. The device driver, which serves to abstract the watchdog hardware...
kiloannum or kiloannus (ka), a unit of time equal to one thousand (103) years Keepalive, a computer network message Kiloampere (kA), a unit of electric current...
connection between two endpoints has not been interrupted, endpoints exchange keepalive messages at regular intervals, which can also be used to automatically...
Protocol state No 125 bytes Ping 9 May be used for latency measurement, keepalive and heartbeat. Both sides can initiate a ping (with any payload). Whoever...
server as a regular X client. During the session, the server can send KeepAlive packets to the display manager at intervals. If the display manager fails...
This method is often used for DTMF relay. RFC 6086 OPTIONS Query the capabilities of an endpoint. It is often used for NAT keepalive purposes. RFC 3261...
Digital Cultures, Leuphana University Lüneburg. The title, Keepalive, refers to the keepalive signal, a message – often sent at predetermined intervals...
a TLS-based tunnel Built-in event loop to handle Dead Peer Detection, keepalive, rekeying, etc. OpenConnect can be built to use either the GnuTLS or OpenSSL...
specified directory. NOOP RFC 959 No operation (dummy packet; used mostly on keepalives). OPTS RFC 2389 Select options for a feature (for example OPTS UTF8 ON)...
radioactive isotope, e.g. krypton-85, can also be used. Ignition electrodes and keepalive discharge electrodes can also be employed. The E/N ratio between the electric...
Boolean (defaults to YES) Deprecated as of 10.5 with the more powerful KeepAlive option. A boolean flag that defines if a job runs continuously or not...
this address (many-to-many connections are not supported). To monitor keepalive status and allocate bandwidth, devices may use RTCP report interval, SIP...
J. Ordemann & Simon D. Barber, "Generic routing encapsulation tunnel keepalives", issued 2010-09-21, assigned to Cisco Technology Inc. S. Hanks; T. Li;...
user-configurable answerback message, as did its successors. C0 and C1 control codes Keepalive "Enquiry Character: Definition and additional resources from ZDNet". ZDNet...
first Frame Relay switch to which it is connected. Information about keepalives, global addressing, IP multicast and the status of virtual circuits is...
specification for connection establishment, zero-window probing, and keepalive transmissions. In October 2002, one of the earliest known cases of time...