Global Information Lookup Global Information

Insulation monitoring device information


An insulation monitoring device monitors the ungrounded system between an active phase conductor and earth. It is intended to give an alert (light and sound) or disconnect the power supply when the resistance between the two conductors drops below a set value, usually 50 kΩ (sample of IEC standard for medical applications). The main advantage is that the ungrounded or floating system allows a continuous operation of important consumers such as medical, chemical, military, etc.

Some manufacturers of monitors for these systems are capable of handling VFDs (Variable Frequency (Speed) Drives). Most, however are not due to issues with the DC-portions of the VFDs.

Most monitors work by injecting low level DC on the line and detecting. Some manufacturers use a patented AMP-monitoring principle (Adapted Measuring Pulse)[citation needed]

and 23 Related for: Insulation monitoring device information

Request time (Page generated in 0.8472 seconds.)

Insulation monitoring device

Last Update:

An insulation monitoring device monitors the ungrounded system between an active phase conductor and earth. It is intended to give an alert (light and...

Word Count : 580

Earthing system

Last Update:

a small number of loads each and should be protected with an insulation monitoring device (generally used only by medical, railway or military IT systems...

Word Count : 5556

IMD

Last Update:

variant by Silicon Graphics), in versions 5.1–6.4 Insulation monitoring device, a protection device or circuit in electric systems Intermodulation distortion...

Word Count : 340

Electrical fault

Last Update:

fault and continue in operation. Wiring codes may require an insulation monitoring device to give an alarm in such a case, so the cause of the ground fault...

Word Count : 2373

Circuit breaker

Last Update:

Ground Fault Circuit Interrupter (GFCI) Hybrid switchgear module Insulation monitoring device Motor control center (MCC) Network protector Power distribution...

Word Count : 4908

Dielectric withstand test

Last Update:

insulation. The test may be between mutually insulated sections of a part, or energized parts and ground. The test is a means to qualify a device's ability...

Word Count : 435

Power system protection

Last Update:

sensing and disconnecting faults. Failures may occur in each part, such as insulation failure, fallen or broken transmission lines, incorrect operation of circuit...

Word Count : 1861

Partial discharge

Last Update:

epoxy insulation or bubbles in transformer oil. Protracted partial discharge can erode solid insulation and eventually lead to breakdown of insulation. PD...

Word Count : 2858

Glossary of electrical and electronics engineering

Last Update:

instrumentation A device that turns some physical property into a measurement. insulation monitoring device A supervisory device to detect failure of...

Word Count : 19286

List of IEC standards

Last Update:

IEC/TS 63383 Cybersecurity aspects of devices used for power metering and monitoring, power quality monitoring, data collection and analysis IEC/TS 63384...

Word Count : 17123

Bioinstrumentation

Last Update:

insulation and a supplemental insulating layer or one layer of reinforced insulation. For example, cardiac monitors typically are IEC class 2 devices...

Word Count : 8421

Current transformer

Last Update:

of the current transformer provides insulation between the primary circuit and ground. By use of oil insulation and porcelain bushings, such transformers...

Word Count : 2897

Artificial cardiac pacemaker

Last Update:

every six months, though will vary depending upon patient/device status and remote monitoring availability. Newer pacemaker models can also be interrogated...

Word Count : 9000

Thermographic camera

Last Update:

vision Auditing of acoustic insulation for sound reduction Baby monitoring systems Chemical imaging Data center monitoring Electrical distribution equipment...

Word Count : 3550

Condition monitoring

Last Update:

Condition monitoring (colloquially, CM) is the process of monitoring a parameter of condition in machinery (vibration, temperature etc.), in order to identify...

Word Count : 3112

Stethoscope

Last Update:

The stethoscope is a medical device for auscultation, or listening to internal sounds of an animal or human body. It typically has a small disc-shaped...

Word Count : 3172

Electrical injury

Last Update:

Double insulated devices have a separate insulation system, distinct from the insulation required for the function of the device, and intended for protection...

Word Count : 5946

Home energy monitor

Last Update:

home energy monitor is a device that provides information about a personal electrical energy usage to a consumer of electricity. Devices may display the...

Word Count : 827

Thermocouple

Last Update:

thermocouple, also known as a "thermoelectrical thermometer", is an electrical device consisting of two dissimilar electrical conductors forming an electrical...

Word Count : 6778

Vacuum flask

Last Update:

flask was encased in foam insulation and, using a large glass vacuum plug, held the saturated cell. The output of the device was 1.018 volts and was held...

Word Count : 2098

Humidifier

Last Update:

(typically every third year or so) tests the ventilation of the residence. Insulation leakage: Measured with a standard blower door test. Cubic meters: The...

Word Count : 4121

Refrigerator

Last Update:

Each has its own separate compressor, condenser and evaporator coils, insulation, thermostat, and door.[citation needed] A hybrid between the two designs...

Word Count : 9291

VGA connector

Last Update:

resolution, but higher-quality cables typically contain coaxial wiring and insulation that make them thicker. While shorter VGA cables are less likely to introduce...

Word Count : 1556

PDF Search Engine © AllGlobal.net