Computer processing efficiency, measured as the power needed per million instructions per second (watts per MIPS)
Instructions per second (IPS) is a measure of a computer's processor speed. For complex instruction set computers (CISCs), different instructions take different amounts of time, so the value measured depends on the instruction mix; even for comparing processors in the same family the IPS measurement can be problematic. Many reported IPS values have represented "peak" execution rates on artificial instruction sequences with few branches and no cache contention, whereas realistic workloads typically lead to significantly lower IPS values. Memory hierarchy also greatly affects processor performance, an issue barely considered in IPS calculations. Because of these problems, synthetic benchmarks such as Dhrystone are now generally used to estimate computer performance in commonly used applications, and raw IPS has fallen into disuse.
The term is commonly used in association with a metric prefix (k, M, G, T, P, or E) to form kilo instructions per second (kIPS), mega instructions per second (MIPS), giga instructions per second (GIPS) and so on. Formerly TIPS was used occasionally for "thousand IPS".
and 25 Related for: Instructions per second information
Instructionspersecond (IPS) is a measure of a computer's processor speed. For complex instruction set computers (CISCs), different instructions take...
the number of instructions by the number of CPU clock cycles. The number of instructionspersecond and floating point operations persecond for a processor...
perinstruction for a program or program fragment. It is the multiplicative inverse of instructionsper cycle. The average of Cycles PerInstruction in...
per day (cpd) and cycles per year (cpy). Cycles perinstruction (CPI) Cycles per metre Heinrich Hertz Instructionsper cycle (IPC) Instructionsper second...
operations/second, then performance per watt can be written as operations/watt-second. Since a watt is one joule/second, then performance per watt can also...
using less energy perinstruction. Out of order CPUs can usually do more instructionspersecond because they can do several instructions at once. In a pipelined...
according to Alex Roland and Philip Shiman, "would run ten billion instructionspersecond to see, hear, speak, and think like a human. The degree of integration...
commonly measured in floating-point operations persecond (FLOPS) instead of million instructionspersecond (MIPS). Since 2017, supercomputers have existed...
B instructions have, in sequence, a 12-bit instruction code (with the second and third bits set to 0 to distinguish them from type A instructions), a...
41 million instructionspersecond Dhrystone MIPS and SPEC integer rating of 27.9. It is approximately twice as fast as the i386 or i286 per clock cycle...
individual instructions are written in simpler code. The goal is to offset the need to process more instructions by increasing the speed of each instruction, in...
sometimes measured in millions of instructionspersecond (MIPS), although the definition depends on the instruction mix measured. Examples of integer...
small instruction manual, which describes how the instructions are encoded. Also, it may define short (vaguely) mnemonic names for the instructions. The...
without Interlocked Pipeline Stages MIPS—Million InstructionsPerSecond MISD—Multiple Instruction, Single Data MIS—Management Information Systems MIT—Massachusetts...
using less energy perinstruction. Out-of-order CPUs can usually do more instructionspersecond because they can do several instructions at once. Control...
so that they complete more instructionsper clock cycle, thus achieving a lower CPI (cycles or clock cycles perinstruction) count, although they may run...
megapixel display with 1024×1024 1-bit pixels, and one million instructionspersecond (MIPS) of processing power. It was also often said that it should...
Linux kernel on comp.os.linux: [...] MIPS is short for Millions of InstructionsPerSecond. It is a measure for the computation speed of a processor. Like...
many as 8000 MIPS (millions of instructionspersecond), use VLIW (very long instruction word), perform eight operations per clock-cycle and are compatible...
This list compares various amounts of computing power in instructionspersecond organized by order of magnitude in FLOPS. Scientific E notation index:...
"jump" instructions (or branches). Furthermore, jump instructions may be made to happen conditionally so that different sequences of instructions may be...
contained 3,000 transistors and could execute approximately 62,000 instructionspersecond. General performance, bus layout and arithmetic logic unit (ALU)...
speeds of up to 16.58 MHz and can run up to 2.7 MIPS (million instructionspersecond), for the base 68328 and DragonBall EZ (MC68EZ328) model. It was...
both executable instructions and data. A single TLB can be provided for access to both instructions and data, or a separate Instruction TLB (ITLB) and...
Global Information