ISO 7637 Road vehicles -- Electrical disturbances from conduction and coupling[1] is an international electromagnetic compatibility vehicle standard published by the International Organization for Standardization (ISO), that relates to 12 and 24 volt electrical systems. As of November 2018, four parts of ISO 7637 have been published,[1][2][3][4][5] and one is in development (part 4):[6]
ISO 7637-1 (last revised October 2015 (2015-10)[1]) Definitions and general considerations
ISO 7637-2 (last revised March 2011 (2011-03)[2]) Electrical transient conduction along supply lines only
ISO 7637-3 (last revised July 2016 (2016-07)[3]) Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
ISO 7637-4 Electrical transient conduction along shielded high voltage supply lines only
ISO 7637-5 (last revised November 2016 (2016-11)[4]) Enhanced definitions and verification methods for harmonization of pulse generators according to ISO 7637
There are several distinct electrical transient waveforms that are required from this testing to ISO 7637-2. These pulses or waveforms include very high rise or fall times often in the nanosecond and microseconds range.[7] These transients are designed to simulate electrical occurrences in operational environments, including a load dump simulation. ISO 7637 is referenced by many vehicle manufacturer standards and individual waveforms are modified to meet specific requirements.[8] ISO 7637 includes both immunity and emissions components of electromagnetic compatibility testing.[9] This standard, including ISO 7637-2 places specific requirements on test equipment that can be used to replicate electrical occurrences.[10]
^ abc"ISO 7637-1:2015". ISO. Retrieved 8 November 2018.
^ ab"ISO 7637-2:2011". ISO. Retrieved 8 November 2018.
^ ab"ISO 7637-3:2016". ISO. Retrieved 8 November 2018.
^ ab"ISO/TR 7637-5:2016". ISO. Retrieved 8 November 2018.
^"1.2 ISO7637 and related standards overview". Texas Instruments. June 2016. Retrieved June 1, 2016.
^"ISO/DTS 7637-4". ISO. Retrieved 8 November 2018.
^Brorein, Edward (2018-01-31). "Mathematically Defining Test Pulse 2b of the ISO-7637-2 Section 5.6.2 Automotive Test Standard". InCompliance Magazine. Retrieved January 31, 2018.
^"ISO 7637-2:2011 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only". Transient Specialists. Retrieved 24 September 2018.
^Transient Emission Analysis..using Simulation (PDF) (Report). EMC Europe 2013. p. 2. Retrieved September 6, 2013.
^Eddleman, Dan (2017-10-22). "Robust Automotive Supply Protection for ISO 7637-2 and ISO 16750-2 Compliance". EE News Automotive. Retrieved October 22, 2017.
ISO7637 Road vehicles -- Electrical disturbances from conduction and coupling is an international electromagnetic compatibility vehicle standard published...
ISO 2711 is an ISO standard describing formats for ordinal dates. The ISO is an international standard-setting body composed of representatives from various...
ISO 2015 is a standard of the International Organization for Standardization (ISO), superseded by ISO standard ISO 8601. The standard ISO week numbering...
technical standard defined by ISO which describes title block formats to be used in technical drawings. ISO 7200:1984 ISO 7200:2004 ISO 128 for the general principles...
1992) is the ISO standard describing the International System of Units (SI). The ISO 1000:1992 standard was withdrawn in 2009 together with ISO 31, and are...
ISO 3307 is an international standard for date and time representations issued by the International Organization for Standardization (ISO). The standard...
ISO 5964 was the ISO standard for the establishment and development of multilingual thesauri. Its full title was Guidelines for the establishment and development...
ISO 2014 is an international standard that was issued in April 1976, and superseded by ISO 8601 in June 1988. ISO 2014 was the standard that originally...
ISO 10962, known as Classification of Financial Instruments (CFI), is a six-letter-code used in the financial services industry to classify and describe...
ISO 10160 is the ISO standard, first published in 1993, that defines the terminology that is used for interlibrary loan transactions between various document...
ISO 2788 was the ISO international standard for monolingual thesauri for information retrieval, first published in 1974 and revised in 1986. The official...
ISO 4217 is a standard published by the International Organization for Standardization (ISO) that defines alpha codes and numeric codes for the representation...
notation: ISO 2014, ISO 2015, ISO 2711, ISO 3307, and ISO 4031. It has been superseded by a second edition ISO 8601:2000 in 2000, by a third edition ISO 8601:2004...
tests. ISO 16750 has five parts: ISO 16750-1: General ISO 16750-2: Electrical loads ISO 16750-3: Mechanical loads ISO 16750-4: Climatic loads ISO 16750-5:...
ISO 19114 Geographic information - Quality evaluation procedures provides a procedural framework for evaluating the quality of digital geographic datasets...
engineering diagrams. ISO 10628 consists of the following parts: Part 1: Specification of Diagrams (ISO 10628-1:2014) Part 2: Graphical Symbols (ISO 10628-2:2012)...
ISO 4031 is a superseded international standard first issued in 1978 by the International Organization for Standardization. It defined the representation...
ISO 7027:1999 is an ISO standard for water quality that enables the determination of turbidity. The ISO 7027 technique is used to determine the concentration...
ISO 704 - Terminology work—Principles and methods It is an ISO standard, which establishes the basic principles and methods for preparing and compiling...
parts: ISO 6344-1:1998: Grain size distribution test ISO 6344-2:1998: Determination of grain size distribution of macrogrits P12 to P220 ISO 6344-3:1998:...
ISO 19011 is an international standard that sets forth guidelines for management systems auditing. The current version is ISO 19011:2018. It is developed...
ISO 10161 is the ISO standard, first published in 1993, that defines the interlibrary loan (ILL) application protocol for communication between various...
an ISO standard covering petroleum products, developed by ISO's Technical Committee (TC) 28: Petroleum products and lubricants. According to ISO's abstract...
The ISO 9000 family is a set of five quality management systems (QMS) standards by the International Organization for Standardization (ISO) that help organizations...
ISO 6346 is an international standard covering the coding, identification and marking of intermodal (shipping) containers used within containerized intermodal...
voluntary standards such as ISO 13485 and ISO 14971. The ISO Technical Committee responsible for the maintenance of this standard is ISO/ TC 210 working with...
ISO 31000 is a family of international standards relating to risk management codified by the International Organization for Standardization. The standard...
ISO 15022 is an ISO standard for securities messaging used in transactions between financial institutions. Participants in the financial industry need...
ISO 9362 is an international standard for Business Identifier Codes (BIC), a unique identifier for business institutions, approved by the International...