The harness knot is a general purpose bend knot used to join two ropes together. The knot can be tied under tension and will not capsize. The harness knot...
the fact that it was used when hauling field artillery into position. Harnessbend List of knots Ashley, Clifford W. (1944), The Ashley Book of Knots, New...
from the fact that at step 3 in the tying sequence the knot is a Double HarnessBend (ABoK #1420). The additional step of passing the ends through the outer...
often associated with its use in hanging a person Harnessbend – used to join two ropes together Harness hitch (artillery loop) – knot with a loop on the...
the body in a complex web-like fashion. A rope harness is similar in effect to a leather bondage harness, in that both are not in themselves normally used...
The sheet bend (also known as becket bend, weaver's knot and weaver's hitch) is a bend knot. It is practical for joining lines of different diameter or...
hang glider (FLPHG), also called powered harness, nanolight, or hangmotor, is a powered hang glider harness with a motor and propeller often in pusher...
The anchor bend is a knot used for attaching a rope to a ring or similar termination. The name is a misnomer, as it is technically not a bend, but a hitch...
The Carrick bend, also known as the Sailor's breastplate, is a knot used for joining two lines. It is particularly appropriate for very heavy rope or cable...
A zeppelin bend (also known as the Rosendahl Bend) is an end-to-end joining knot formed by two symmetrically interlinked overhand knots. It is stable,...
Lapp knot is a type of bend. It has the same structure as the sheet bend, but the opposite ends are loaded. The slipped Lapp bend is also an exploding knot...
The Flemish bend, also known as a figure eight bend, a rewoven figure eight is a knot for joining two ropes of roughly similar size. A loose figure-eight...
foot-launched glider aircraft with no rigid primary structure. The pilot sits in a harness or in a cocoon-like 'pod' suspended below a fabric wing. Wing shape is...
The offset overhand bend (OOB, ABoK No. 1410) is a knot used to join two ropes together end-to-end. It is formed by holding two rope ends next to each...
The butterfly bend is a knot used to join the ends of two ropes together. It is the analogous bend form of the butterfly loop, in that it is the butterfly...
full set of Studebaker carriages and harnesses for the White House. As the 20th century approached, the South Bend plant "covered nearly 100 acres (0.40 km2)...
wikidata descriptions as a fallback Fine harness – American competition with high-stepping driving horses Harness racing – A form of horse racing that uses...
famous harness racer Affirmed: U.S. Triple Crown winner (1978) Ajax: 18 consecutive race wins, before he was defeated at 1/40 Albatross: harness racer...
to bend two ropes together. However, modern instruction teaches that it is fine for noncritical applications, especially if stabilized. A proper bend knot...
The Hambletonian Stakes is a major American harness race for three-year-old trotting horses, named in honor of Hambletonian 10, a foundation sire of the...
1913. Hermès 1837 Public company 5 French designer brand Started as a harness manufacturer by Thierry Hermès. Operates stand alone shops and concessions...
Global Information