Grease fitting information

A grease fitting, grease nipple, Zerk fitting, grease zerk, or Alemite fitting is a metal fitting used in mechanical systems to feed lubricants, usually...

to a specific point, usually from a grease cartridge to a grease fitting or 'nipple'. The channels behind the grease nipple lead to where the lubrication...

Grease 2 is a 1982 American musical romantic comedy film and the sequel to the 1978 film Grease, adapted from the 1971 musical of the same name by Jim...

A grease trap (also known as grease interceptor, grease recovery device, grease capsule and grease converter) is a plumbing device (a type of trap) designed...

built into them. If the idler arm is fitted with grease fittings, these should be lubricated with a grease gun at each oil change. "What is an idler arm...

use only a special grease or nothing at all (if the mating surfaces are sufficiently precisely formed). Although flange fittings are bulky, they perform...

"surface check" grease fitting that would help to prevent dirt from entering through a fitting. Lincoln had developed many advances in fittings including the...

A compression fitting is a fitting used in plumbing and electrical conduit systems to join two tubes or thin-walled pipes together. In instances where...

they are "lubed for life". Formerly most ball joints had grease fitting (sometimes called a grease zerk) and were designed for periodic addition of a lubricant...

and the other would have an outer (or female) joint of a correspondingly fitting taper with the ground glass surface facing inward. To connect the hollow...

lower-than-recommended viscosity is used. Lubrication can be done with a grease, which has advantages that grease is normally held within the bearing releasing the lubricant...

engineering Vacuum grease "KF (QF) Flanges Technical Notes". Kurt J. Lesker Company. Retrieved 2007-09-02. "ISO KF Flanges and Fittings" (PDF). Archived...

service ell) is a type of plumbing or piping fitting intended to join a piece of pipe and another fitting at an angle. The difference between a street...

is usually packed with string which has been soaked in tallow or similar grease. The gland nut allows the packing material to be compressed to form a watertight...

brake system analyzers, tire inflation systems, and tools to unclog grease fittings. IPA won the PTEN Innovation Award in 2011 and 2012, for their automotive...

which were swapped partway through the trip, primarily because some grease fittings on the train could not withstand the entire journey at high speed....

parts that remain invariant in practice despite theoretical variability. "Greasing" an extension point, where some implementations indicate support for non-existent...

valve Globe valve Grease trap Grinder pump Hose coupling Manifold Needle valve Nipple (plumbing) Pinch valve Piping and plumbing fitting Plug (sanitation)...

as the use of welding to fasten bipod legs to the clevis joint and grease fittings dissimilar to those used by the US model. The collimator sight for...

liquid water along the pipe forms a "slug" which impacts a valve of pipe fitting, creating a loud hammering noise and high pressure. Vacuum caused by condensation...

and other risks normal to the construction industry. Piping and plumbing fitting "Steamfitter/Pipefitter: School of Trades and Technology". Thompson Rivers...

within a compression chamber separate from the gun barrel. Traditionally, a grease-lubricated steel coil spring is used as the powerplant main spring. Before...

barb, and quick connect fittings. In the 1980s, the use of quick-connector systems became increasingly popular. These are fittings that attach to the hose...