Field in Ethernet frames indicating which protocol is encapsulated in the payload
EtherType is a two-octet field in an Ethernet frame. It is used to indicate which protocol is encapsulated in the payload of the frame and is used at the receiving end by the data link layer to determine how the payload is processed. The same field is also used to indicate the size of some Ethernet frames.
EtherType is also used as the basis of 802.1Q VLAN tagging, encapsulating packets from VLANs for transmission multiplexed with other VLAN traffic over an Ethernet trunk.
EtherType was first defined by the Ethernet II framing standard and later adapted for the IEEE 802.3 standard. EtherType values are assigned by the IEEE Registration Authority.
the IEEE Assigned Ethertype with IEEE Std 802.3 Local and Metropolitan Area Networks (PDF), retrieved 2022-02-03 "Public EtherType list". IEEE. Retrieved...
(each six octets in length), the EtherType field and, optionally, an IEEE 802.1Q tag or IEEE 802.1ad tag. The EtherType field is two octets long and it...
Ethers can be symmetrical of the type ROR or unsymmetrical of the type ROR'. Examples of the former are dimethyl ether, diethyl ether, dipropyl ether...
Ethernet, with 48-bit destination and source addresses and a global 16-bit Ethertype-type field. Version 2 was published in November 1982 and defines what has...
maintained and published by the Internet Assigned Numbers Authority (IANA). EtherType Internet Protocol IPv4 (including packet structure) IPv6 (and packet structure)...
protocol). Instead, retransmissions rely on higher-layer protocols. As the EtherType in an Ethernet frame using Ethernet II framing is used to multiplex different...
Service Access Point (SAP) fields. SNAP supports identifying protocols by EtherType field values; it also supports vendor-private protocol identifier spaces...
underlying network as raw payload. In the case of Ethernet, a 0x0806 EtherType value is used to identify ARP frames. The size of the ARP message depends...
indicates an encapsulated EtherType. Ethernet II encapsulation comprises an Ethernet II frame header (destination MAC, source MAC, EtherType 0x8137) followed by...
LLC provides flow control and multiplexing for the logical link (i.e. EtherType, 802.1Q VLAN tag etc), while the MAC provides flow control and multiplexing...
Model The EtherCAT protocol is optimized for process data and is transported directly within the standard IEEE 802.3 Ethernet frame using Ethertype 0x88a4...
Other multicast and unicast destination addresses are permitted. The EtherType field is set to 0x88cc. Each LLDP frame starts with the following mandatory...
IDs, Standard Group MAC Addresses, Unique Registration Numbers (URN), EtherType values, etc.) The IEEE Registration Authority was formed in 1986 in response...
Structural types include: Ether phospholipids: phospholipids are known to have ether-linked "tails" instead of the usual ester linkage. Ether on sn-1, ester...
In chemistry, a phenol ether (or aromatic ether) is an organic compound derived from phenol (C6H5OH), where the hydroxyl (-OH) group is substituted with...
sender for a specified period of time. A media access control (MAC) frame (EtherType 0x8808) is used to carry the pause command, with the Control opcode set...
in turn may be encapsulated into a proper Ethernet frame format with EtherType values of 0x8847 and 0x8848. The increased overhead of extra MPLS and...
EtherChannel is a port link aggregation technology or port-channel architecture used primarily on Cisco switches. It allows grouping of several physical...
switch. In the case of Ethernet frames this is done through the use of EtherType values 0x8847 and 0x8848, for unicast and multicast connections respectively...
The etheric plane (see also etheric body) is a term introduced into Theosophy by Charles Webster Leadbeater and Annie Besant to represent the subtle part...