Distributed mode loudspeaker information

Distributed Mode Loudspeaker (DML) is a flat panel loudspeaker technology, developed by NXT, in which sound is produced by inducing uniformly distributed...

Live, an HBO television talk-comedy show with Dennis Miller Distributed mode loudspeaker, a speaker technology developed by Cambridge-based company called...

Resources, Geology and Geophysics, Australia Balanced Mode Radiator, a hybrid distributed mode loudspeaker Brecon Mountain Railway, Wales Buffalo Metro Rail...

been sold and distributed throughout the US. The Smart Alec Jr was one of the models sold throughout. Canada : The VZ200 was distributed throughout Canada...

days, Dieter Burmester always wanted to make his audio components and loudspeakers reproduce music as naturally and purely as possible. It was the malfunction...

losses, loudspeaker transformers can power many individual loudspeakers from a single audio circuit operated at higher than normal loudspeaker voltages...

allows the producer to think in terms of source directions rather than loudspeaker positions, and offers the listener a considerable degree of flexibility...

Beginning as a retail stereo store and original equipment manufacturer of loudspeakers for companies such as Sonance, Niles Audio, Bang and Olufsen, JBL, Polk...

voiced by Ellen McLain, announces the teams' current objectives over loudspeakers. The player limit for one match is 16 on the Xbox 360 and PlayStation...

soft core. The coiling provides distributed inductance, while a conductive layer close to the wires provides distributed capacitance. The combination is...

and reduced error in assembly. Dynaco also distributed the famous SEAS 'A-Series' of bookshelf loudspeakers that were manufactured in Denmark, using input...

cycle repeats. Fretting (so-called dynamic corrosion) is a common failure mode in electrical connectors that have not been specifically designed to prevent...

which is then sent through an audio power amplifier and ultimately to a loudspeaker. Digital audio systems may include compression, storage, processing,...

adequate and a distributed-element model must be used instead. The mechanical distributed elements are entirely analogous to electrical distributed elements...

A subwoofer (or sub) is a loudspeaker designed to reproduce low-pitched audio frequencies, known as bass and sub-bass, that are lower in frequency than...

fictitious - the resistor and inductor are distributed quantities as in a transmission line). The loudspeaker may be modelled more accurately by a more...

using a computer. The sound material will then be distributed spatially, via multiple loudspeakers, using a practice known as "sound diffusion". The work...

time-invariant (LTI) system (such as a microphone, coaxial cable, amplifier, loudspeaker, telecommunications system, ethernet cable, digital filter, or analog...

from three loudspeakers (left, center, and right) located in front of the audience. Surround sound adds one or more channels from loudspeakers to the side...

response throughout the audible frequency range, and effective damping of loudspeaker resonances. The 0.1% distortion figure of the Williamson amplifier became...

lowering the output impedance and thereby increasing electrical damping of loudspeaker motion at and near the resonance frequency of the speaker. When assessing...

are available. Output is provided in mono by a small (4 cm) built-in loudspeaker with volume control, driven by an internal amplifier. Stereo output is...

energy. Pink noise sounds like a waterfall. It is often used to tune loudspeaker systems in professional audio. Pink noise is one of the most commonly...

of an audio signal before application to bass, mid-range, and tweeter loudspeakers; the combining and later separation of multiple telephone conversations...