Made by allowing molten metal to solidify in a mold
A cast bullet is made by allowing molten metal to solidify in a mold. Most cast bullets are made of lead alloyed with tin and antimony; but zinc alloys have been used when lead is scarce, and may be used again in response to concerns about lead toxicity. Most commercial bullet manufacturers use swaging in preference to casting, but bullet casting remains popular with handloaders.[1]
A castbullet is made by allowing molten metal to solidify in a mold. Most castbullets are made of lead alloyed with tin and antimony; but zinc alloys...
A bullet is a kinetic projectile, a component of firearm ammunition that is shot from a gun barrel. They are made of a variety of materials, such as copper...
resize cast lead bullets, although all handloaders do lubricate cast lead bullets. An option to using a lubricating press is simply to coat the bullets with...
The Royal Enfield Bullet was an overhead valve, single-cylinder, four-stroke motorcycle initially made by Royal Enfield in Redditch, Worcestershire England...
silver bullet is often one of the few weapons that are effective against a werewolf, vampire, witch, or other supernatural beings. The term silver bullet is...
WKS006021 Fryxell, Glen. "From Ingot to Target: A CastBullet Guide for Handgunners". pp. Chapter 5, Castbullet lubrication. "How to Safely Clean Car Battery...
nose bullet would, and the sharp shoulder enlarges the hole neatly, allowing easy and accurate scoring of the target. A hunting flat nosed castbullet will...
used with cast lead plain-base bullets. It does not apply to jacketed or gas-check castbullets. Below is a chart containing various bullet alloys, the...
problems when coupled with cast or swaged lead bullets. It was long thought that the high temperatures melted the base of the bullet, but this is no longer...
handloaded with cast lead bullets due to the increased bore diameter generated by the shallow grooves. The use of oversized castbullets greatly solves...
Arizona State Rifle and Pistol Association President Noble C. Hathaway and CastBullet Director Dan Walliser surveyed state residents to determine what "Old...
[citation needed] and thus choose to make castbullets. To get high precision results, it is common to cast the bullets slightly oversized, then swage the resulting...
bullets are bullets constructed from a one solid material, usually metal, and do not have multiple components. Unlike jacketed hollow point bullets (JHP)...
point of impact. Also, the Fouling Shot Journal, a publication of the CastBullet Association Forward assist: A button, found on firearms firing from closed...
channel around ammunition, either bullets or cartridge cases. The cannelure may be pressed into or cast with the bullet or case. In the Minié ball the purpose...