This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "ATM adaptation layer" – news · newspapers · books · scholar · JSTOR(March 2008) (Learn how and when to remove this message)
The use of Asynchronous Transfer Mode (ATM) technology and services creates the need for an adaptation layer in order to support information transfer protocols, which are not based on ATM. This adaptation layer defines how to segment higher-layer packets into cells and the reassembly of these packets. Additionally, it defines how to handle various transmission aspects in the ATM layer.
Examples of services that need adaptations are Gigabit Ethernet, IP, Frame Relay, SONET/SDH, UMTS/Wireless, etc.
The main services provided by AAL (ATM Adaptation Layer) are:
Segmentation and reassembly
Handling of transmission errors
Handling of lost and misinserted cell conditions
Timing and flow control
The following ATM Adaptation Layer protocols (AALs) have been defined by the ITU-T.[1] It is meant that these AALs
will meet a variety of needs. The classification is based on whether a timing relationship must be maintained between source and destination, whether the application requires a constant bit rate, and whether the transfer is connection oriented or connectionless.
^Cite error: The named reference cisco-atm was invoked but never defined (see the help page).
and 24 Related for: ATM adaptation layer information
(ATM) technology and services creates the need for an adaptationlayer in order to support information transfer protocols, which are not based on ATM....
ATMAdaptationLayer 5 (AAL5) is an ATMadaptationlayer used to send variable-length packets up to 65,535 octets in size across an Asynchronous Transfer...
ATMAdaptationLayer 2 (AAL2) is an Asynchronous Transfer Mode (ATM) adaptationlayer, used primarily in telecommunications; for example, it is used for...
management (OAM) purposes, and to delineate packet boundaries in some ATMadaptationlayers (AAL). If the most significant bit (MSB) of the PT field is 0, this...
provides unreliable virtual circuits, but the ATM protocol provides for reliability through the ATMadaptationlayer (AAL) Service Specific Convergence Sublayer...
Encapsulation over ATM is specified in RFC 2684. It defines two mechanisms for identifying the protocol carried in ATMAdaptationLayer 5 (AAL5) frames....
carried, so in ATM nomenclature, there are different ATMAdaptationLayers. The process defined for most data is named ATMAdaptationLayer No. 5 or AAL5...
AAL1/AAL2 ATM packets. VoATM over DSL is a similar service, which is used to carry packetized voice signals over a DSL connection. ATMAdaptationLayer 1 (AAL1)...
Asynchronous Transfer Mode (ATM) modems. They use ATMAdaptationLayer 5 (AAL5) to segment each Ethernet packet into a series of 53-byte ATM cells for transmission...
as AES51-2006. For minimum latency, AES47 uses "raw" ATM cells, ATMadaptationlayer 0. Each ATM virtual circuit negotiates the parameters of a stream...
being handled. There are several different schemes, referred to as ATMadaptationlayers (AAL). The schemes are: AAL0 – Raw cells with no special format...
to User Indication, a field of the 3-byte CPS header, part of the ATMAdaptationLayer 2 This disambiguation page lists articles associated with the title...
over ATMAdaptationLayer 5". tools.ietf.org. Newman, P.; Lyon, T.; Minshall, G. (1 March 1996). "Flow labelled IP: A connectionless approach to ATM". Proceedings...
Advancement League, see above) Abstract algebraic logic, in mathematics ATMAdaptationLayers, to compute information transfer Automated Anatomical Labeling,...
while ATM uses fixed-length (53 bytes) cells. Packets must be segmented, transported and re-assembled over an ATM network using an adaptationlayer, which...
identifying the protocol carried in ATMAdaptationLayer 5 (AAL5) frames specified by RFC 2684, Multiprotocol Encapsulation over ATM. With virtual circuit multiplexing...
large majority of its mass. The water pressure can reach up to 76 MPa (750 atm; 11,000 psi). Due to there being no light, there are no plants producing...
Transfer Mode (ATM), which highly improves scalability of the signaling networks. M3UA stands for MTP Level 3 (MTP3) User AdaptationLayer as defined by...